loading
WB-009
FANXI
9603501100
| Availability: | |
|---|---|
| Quantity: | |
Machinery Copper Circular Wire Brush
1.The knotted twist cup brush are available to fit on portable angle grinders,large angle brinders,pneumatic grinders etc.
2.Useful tools to remove rust.
3.Ideaful to clean rust, painting, welding burs..
4.reliable quality,good performance.
Applying of Industrial brushes
Industrial brushes used in the surface- treatment of metal, mainly aspects as below:
(1) Rough machining of surface(polish, pull rough, rust clearance)
(2) Clear of surface (dirt reduce, oil relieve)
(3) Finishing of surface(Mill, gloss marking ,polish)
Selection for applying of industrial brushes
First of all, the choice of industrial brushes would be according with the performance of the material which will be done, e.g: smooth finish and hardness of material, etc…selecting suitable steel wire of brushes; choosing correct shape of brushes according to the different condition; to calculate the specification and rounds of the brushes basis on technological process Normally, same diameter of the wire, the more short ,the mill force is more strong, the more long, the more less, and diameter of whole brushes(around one) more bigger, and result is much better..
The solution of using brushes if the effective is not very satisfied.
If the effective of using of brushes is too weak
--Choosing a bigger diameter on or rising the speed of brushes(no more than Max. speed)
--Reducing the length of wire
--Selected a bigger wire brushes
If the effective of using of brushes is too strong
--Choosing a smaller diameter on or reduce the speed of brushes
--To longer the length of wire
--Selected a smaller wire brushes
Surface is to rough
--Choosing a bigger diameter on or rising the speed of brushes(no more than Max. speed)
--Reducing the length of wire
--Selected a bigger wire brushes
Surface is to gloss
--Choosing a smaller diameter on or reduce the speed of brushes.
--To longer the length of wire
--Selected a smaller wire brushes
| D(mm/inch) | W(mm) | T(mm) | Max.Speed(R.P.M) | Qty(pcs) | MEAS(cm) | NW/GW(kgs) |
| 75/3" | 1/2" | 15 | 4500 | 240 | 44×30×38 | 12-14 |
| 100/4" | 1/2" 5/8" | 19 | 4500 | 120 | 55×44×18 | 12-14 |
| 125/5" | 7/8" | 29 | 4500 | 40 | 28×28×29 | 9-11 |
| 150/6" | 7/8" | 33 | 3750 | 40 | 33×33×34 | 10-12 |
| 200/8" | 7/8" | 42 | 3750 | 20 | 43×43×17 | 10-12 |
Machinery Copper Circular Wire Brush
1.The knotted twist cup brush are available to fit on portable angle grinders,large angle brinders,pneumatic grinders etc.
2.Useful tools to remove rust.
3.Ideaful to clean rust, painting, welding burs..
4.reliable quality,good performance.
Applying of Industrial brushes
Industrial brushes used in the surface- treatment of metal, mainly aspects as below:
(1) Rough machining of surface(polish, pull rough, rust clearance)
(2) Clear of surface (dirt reduce, oil relieve)
(3) Finishing of surface(Mill, gloss marking ,polish)
Selection for applying of industrial brushes
First of all, the choice of industrial brushes would be according with the performance of the material which will be done, e.g: smooth finish and hardness of material, etc…selecting suitable steel wire of brushes; choosing correct shape of brushes according to the different condition; to calculate the specification and rounds of the brushes basis on technological process Normally, same diameter of the wire, the more short ,the mill force is more strong, the more long, the more less, and diameter of whole brushes(around one) more bigger, and result is much better..
The solution of using brushes if the effective is not very satisfied.
If the effective of using of brushes is too weak
--Choosing a bigger diameter on or rising the speed of brushes(no more than Max. speed)
--Reducing the length of wire
--Selected a bigger wire brushes
If the effective of using of brushes is too strong
--Choosing a smaller diameter on or reduce the speed of brushes
--To longer the length of wire
--Selected a smaller wire brushes
Surface is to rough
--Choosing a bigger diameter on or rising the speed of brushes(no more than Max. speed)
--Reducing the length of wire
--Selected a bigger wire brushes
Surface is to gloss
--Choosing a smaller diameter on or reduce the speed of brushes.
--To longer the length of wire
--Selected a smaller wire brushes
| D(mm/inch) | W(mm) | T(mm) | Max.Speed(R.P.M) | Qty(pcs) | MEAS(cm) | NW/GW(kgs) |
| 75/3" | 1/2" | 15 | 4500 | 240 | 44×30×38 | 12-14 |
| 100/4" | 1/2" 5/8" | 19 | 4500 | 120 | 55×44×18 | 12-14 |
| 125/5" | 7/8" | 29 | 4500 | 40 | 28×28×29 | 9-11 |
| 150/6" | 7/8" | 33 | 3750 | 40 | 33×33×34 | 10-12 |
| 200/8" | 7/8" | 42 | 3750 | 20 | 43×43×17 | 10-12 |
