| Quantity: | |
|---|---|
Procuct Name: Roll Forged HSS Taper Shank Twist Drill Bit for Metal Drilling
Material: HSS 4241 4341 6542-M2 (Cobalt 5% M35 is Available)
Process: Roll Forged (Milled is Available)
Standard: DIN345 (ANSI,DIN341, DIN1870 are Also Available)
MT No.: No.1 to No.6
Size: 7.5mm-100mm and 3/8" to 4"
Point Angle: 118 Degree (135 Degree Split Point, Thinning Point are Available)
Flute Type: Type N, Right Hand Cutting
Surface Finish: Black & White (Black Oxide, Gray & Bright, Bright, Amber Color, Titanium Coating are Also available)
Package: One Piece in Paper Box,Plastic Box,Wood Box.
Features
1,Precise dimension,long life and high efficiency.
2,High-speed steel (HSS) provides hardness for wear resistance
3,Black andh White finish reduces wear while promoting chip and coolant flow on ferrous materials
4,Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge
5,Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters
6,When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
7,Designed to perform in a broad range of materials in the iron and steel families
8,Spiral flutes are constructed with a higher flute angle to remove chips more easily.
Made from High Speed Steel, Right hand cutting. Standard two flute design.
General purpose, normal duty drills designed for drilling holes in a variety or normalsteel, cast iron, and other ferrous and non-ferrous metals and alloys.
Have a normal 118 degree drill point angle suitable for a variety of drilling applications and conditions.
Taper shanks to be used in a taper socket which are sized by the standard morsetaper sizes.
Black oxide finish or Sandblasted Finish are available on request.
Drill Bits Set are available on request.
Metric Size available ( DIN345 Standard ):
5mm ~ 13.2mm 1# Morse Taper
13.5mm ~ 23.0mm 2# Morse Taper
23.25mm ~ 31.75mm 3# Morse Taper
Inch Size available ( ANSI B94.11M Standard ):
3/16" ~ 15/32" 1# Morse Taper
31/64" ~ 25/32" 2# Morse Taper
51/64" ~ 1-1/16" 3# Morse Taper
1-5/64" ~ 1-1/4" 4# Morse Taper
Procuct Name: Roll Forged HSS Taper Shank Twist Drill Bit for Metal Drilling
Material: HSS 4241 4341 6542-M2 (Cobalt 5% M35 is Available)
Process: Roll Forged (Milled is Available)
Standard: DIN345 (ANSI,DIN341, DIN1870 are Also Available)
MT No.: No.1 to No.6
Size: 7.5mm-100mm and 3/8" to 4"
Point Angle: 118 Degree (135 Degree Split Point, Thinning Point are Available)
Flute Type: Type N, Right Hand Cutting
Surface Finish: Black & White (Black Oxide, Gray & Bright, Bright, Amber Color, Titanium Coating are Also available)
Package: One Piece in Paper Box,Plastic Box,Wood Box.
Features
1,Precise dimension,long life and high efficiency.
2,High-speed steel (HSS) provides hardness for wear resistance
3,Black andh White finish reduces wear while promoting chip and coolant flow on ferrous materials
4,Self-centering 118-degree notched point penetrates material without a pilot hole more easily than a conventional point, and maintains a sharp cutting edge
5,Morse taper shank allows the tool to be inserted directly into the machine's spindle to facilitate high-torque applications such as large cut diameters
6,When run in a counterclockwise direction (right-hand cut) spiral fluted tools evacuate chips up and out of the cut to reduce clogging
7,Designed to perform in a broad range of materials in the iron and steel families
8,Spiral flutes are constructed with a higher flute angle to remove chips more easily.
Made from High Speed Steel, Right hand cutting. Standard two flute design.
General purpose, normal duty drills designed for drilling holes in a variety or normalsteel, cast iron, and other ferrous and non-ferrous metals and alloys.
Have a normal 118 degree drill point angle suitable for a variety of drilling applications and conditions.
Taper shanks to be used in a taper socket which are sized by the standard morsetaper sizes.
Black oxide finish or Sandblasted Finish are available on request.
Drill Bits Set are available on request.
Metric Size available ( DIN345 Standard ):
5mm ~ 13.2mm 1# Morse Taper
13.5mm ~ 23.0mm 2# Morse Taper
23.25mm ~ 31.75mm 3# Morse Taper
Inch Size available ( ANSI B94.11M Standard ):
3/16" ~ 15/32" 1# Morse Taper
31/64" ~ 25/32" 2# Morse Taper
51/64" ~ 1-1/16" 3# Morse Taper
1-5/64" ~ 1-1/4" 4# Morse Taper
